Save money and Gain
Fuel economy, efficiency, power while preventing premature wear. Are
your lifters noisy? Does your engine feel like something is hold it
back? All of these are problems we all are concerned with. Try Amsoil
Synthetic Oils or an Engine Flush to help improve the performance of
your vehicle.
AMSOIL
Synthetic 10W-30 Motor Oil (ATM) and 10
competing conventional, synthetic and synthetic blend 10W-30 motor
oils were subjected to a series of motor oil tests. The competing oils
included petroleum-based Castrol GTX, Chevron Supreme, Havoline,
Formula Shell and Pennzoil, as well as synthetic-blends Trop Artic and
Motorcraft, and full-synthetic Pennzoil Platinum, Quaker State
Advanced Full Synthetic and Mobil 1 Extended Performance.
Seven tests were run on the motor oils. The Thin-Film Oxygen Uptake
Test (TFOUT) measures the oxidation stability of engine oils. The High
Temperature/High Shear Test (HTHS) measures a lubricant’s viscosity
under severe operating conditions. The NOACK Volatility Test measures
the evaporation loss of oils in high temperature service. Pour Point
indicates the lowest temperature at which a fluid will flow. Total
Base Number (TBN) is the measurement of a lubricant’s reserve
alkalinity for combating acids. The Cold Cranking Simulator
Test (CCS) indicates the degree to which a lubricant can impact cold
weather starting. The impressive test results show AMSOIL Synthetic
10W-30 Motor Oil outperformed the competitors in nearly every test.
Extends
Oil Life
The Thin Film Oxygen Uptake Test (TFOUT) is used
to evaluate engine oil’s ability to resist heat and oxygen breakdown
when contaminated with oxidized/nitrated fuel, water, and soluble
metals such as lead, copper, iron, manganese and silicon. This test
is designed to mimic the operating conditions of a gasoline engine.
AMSOIL 10W-30 Synthetic Motor Oil has superior
heat and oxidation resistance to control sludge deposits and extend
oil life. Engines stay clean for maximum protection and oil changes
are reduced, saving time and money.
Protects Hot Engines
The High Temperature/High Shear Test measures a
lubricant’s viscosity under severe high temperature and shear
conditions that are similar to severe service applications in an
engine. In order to prevent wear, it is important for a lubricant to
maintain its protective viscosity level under severe operating
conditions.
AMSOIL 10W-30 Synthetic Motor Oil does not “shear back” and thin out
like other motor oils. Its superior viscosity stability provides
unsurpassed bearing protection for dependable engine operation,
especially during hot operating conditions.
Maximizes Fuel Economy, Reduces
Oil Consumption and Emissions
The NOACK Volatility Test determines the
evaporation loss of lubricants in high temperature service. The more
motor oils vaporize, the thicker and heavier they become,
contributing to poor circulation, reduced fuel economy and increased
oil consumption, wear and emissions.
AMSOIL 10W-30 Synthetic Motor Oil resists high
temperature volatilization (evaporation) better than other motor
oils. AMSOIL Synthetic Motor Oil maintains peak fuel efficiency and
reduces oil consumption and emissions.
Improves Cold Temperature Startup
The Pour Point Test determines the lowest
temperature at which a lubricant will flow. The lower a lubricant’s
pour point, the better protection it provides in low temperature
service. Unlike conventional oils that solidify in cold
temperatures, AMSOIL 10W-30 Synthetic Motor oil remains fluid down
to -58° F. AMSOIL Synthetic Motor Oil helps engines turn over easier
and flows quickly to engine parts for critical start-up protection.
Engines start faster and wear is greatly reduced for extended engine
life.
Controls Acid Formation
Total Base Number (TBN) is the measurement of a
lubricant’s reserve alkalinity, which aids in the control of
acids formed during the combustion process. The higher a motor oil’s
TBN, the more effective it is in suspending wear-causing
contaminants and reducing the corrosive effects of acids over an
extended period of time.
The high TBN of AMSOIL Synthetic 10W-30 Motor Oil
allows it to effectively combat wear-causing contaminants and acids,
providing superior protection and performance over extended drain
intervals.
Helps Engines Start Easier
The Cold Crank Simulator Test
determines the apparent viscosity of lubricants at low temperatures
and high
shear rates. Viscosity of lubricants under these conditions is
directly related to engine cranking and startability. The lower a
lubricant’s cold crank viscosity, the easier an engine will turn
over in cold temperatures. The low cold crank viscosity of AMSOIL
Synthetic 10W-30 Motor Oil reduces drag on moving engine parts and
allows engines to achieve critical cranking speed in extremely
frigid temperatures. Engines turn over quickly and dependably in the
coldest winter temperatures.
Protects Against Wear
The Four-Ball Wear Test evaluates the protection
provided by engine oil under conditions of pressure and sliding
motion. The size of the scar left as a result of the test determines
the amount of wear protection the lubricant provides. The smaller
the wear scar, the better the protection. Tests show that AMSOIL
10W-30
Synthetic Motor Oil has better antiwear performance than all other
oils tested. With AMSOIL Synthetic Motor
Oil, engine life can be extended and major repairs are often
reduced.
Engine
Flush (AEF)
AMSOIL Fast Acting Engine Flush is made from a carefully selected
blend of solvents and special cleaning agents that dissolve and
disperse harmful deposits formed in the crankcase, cylinder walls,
pistons and rings of an internal combustion engine. When used as
directed, it cleans and restores operating efficiency to valves, valve
lifters, rocker arms, and pistons for improved horsepower, fuel
economy, and performance. Use before changing oil.
Chances are, when your engine was new it delivered the power and fuel
efficiency it was designed for. But now, as your engine accumulates
miles, things are happening that are adversely affecting its
performance. Slowly but surely, your engine is gathering harmful
deposits that will eventually cost you money.
Even though you may follow a routine service schedule, your driving
conditions may be far from routine. Stop and go driving, prolonged
periods of idling, short trips that don't allow your engine time to
warm up, towing a trailer, the ingestion of airborne dirt, fuel
dilution, water condensation, and oxidized oil will eventually cause
the formation of a thick, gummy deposit known as sludge. Settling
throughout the engine, sludge will clog oil passages, restricting the
flow of oil to vital engine parts, especially in the upper valve train
areas.
Extended Life 10W-30 Synthetic Motor Oil
(XLT)
AMSOIL Extended Life Synthetic Motor Oils deliver exceptional protection for
7,500-mile/6-month oil change intervals or longer where stated by vehicle
manufacturers or indicated by electronic oil life monitoring systems. They
provide "Peace-of-Mind" for owners of modern vehicles where drain intervals
exceed conventional oil recommendations of 3,000 miles.
Security Beyond 3,000 Miles
Extended Life 10W-40 Synthetic
Motor Oil (XLO)
AMSOIL Extended Life Synthetic Motor Oils deliver exceptional protection for
7,500-mile/6-month oil change intervals or longer where stated by vehicle
manufacturers or indicated by electronic oil life monitoring systems. They
provide "Peace-of-Mind" for owners of modern vehicles where drain intervals
exceed conventional oil recommendations of 3,000 miles.
Security Beyond 3,000 Miles
Extended Life 5W-20 Synthetic Motor
Oil (XLM)
AMSOIL Extended Life Synthetic Motor Oils deliver exceptional protection for
7,500-mile/6-month oil change intervals or longer where stated by vehicle
manufacturers or indicated by electronic oil life monitoring systems. They
provide "Peace-of-Mind" for owners of modern vehicles where drain intervals
exceed conventional oil recommendations of 3,000 miles.
Security Beyond 3,000 Miles
Extended Life 5W-30 Synthetic Motor
Oil (XLF)
AMSOIL Extended Life Synthetic Motor Oils deliver exceptional protection for
7,500-mile/6-month oil change intervals or longer where stated by vehicle
manufacturers or indicated by electronic oil life monitoring systems. They
provide "Peace-of-Mind" for owners of modern vehicles where drain intervals
exceed conventional oil recommendations of 3,000 miles.
Security Beyond 3,000 Miles
SAE 10W-30 Formula 4-Stroke®
| Marine Synthetic Motor Oil (WCT)
AMSOIL 10W-30 Formula 4-Stroke® Marine Synthetic Motor Oil (WCT) is a premium
quality synthetic formulation engineered for the harsh operating conditions of
marine environments. It withstands the intense mechanical action of
continuous, high RPM operation to deliver superior viscosity protection.
Formula 4-Stroke® Marine Synthetic Motor Oil is specially fortified with a
heavy treatment of advanced additives that protects motors against wear, rust
and deposits. It excels in both high horsepower applications and all-day
trolling conditions.
SAE 10W-40 Formula 4-Stroke® |
Marine Synthetic Motor Oil (WCF)
AMSOIL 10W-40 Formula 4-Stroke® Marine Synthetic Motor Oil (WCF) is a premium
quality synthetic formulation engineered for the harsh operating conditions of
marine environments. It withstands the intense mechanical action of
continuous, high RPM operation to deliver superior viscosity protection.
Formula 4-Stroke® Marine Synthetic Motor Oil is specially fortified with a
heavy treatment of advanced additives that protects motors against wear, rust
and deposits. It excels in both high horsepower applications and all-day
trolling conditions.
Series 2000 Synthetic 20W-50 Racing
Oil (TRO)
The number one choice for racers of all types of vehicles. Special synthetic
base stock blend and advanced additive package provides up to four times the
wear protection of other motor oils. Reduces friction for quicker engine
response and increased horsepower.
Signature Series 0W-30 100%
Synthetic Motor Oil (SSO)
AMSOIL Signature Series 0W-30 Synthetic Motor Oil is the industry benchmark in
lubrication technology. Engineered with the world’s finest synthetic base oils
and high performance additives, AMSOIL Signature Series 0W-30 is designed for
those who demand the absolute best in motor oil performance. The exclusive
“extended drain” formulation delivers superior engine protection and maximum
fuel economy. AMSOIL Signature Series 0W-30 is a premium grade synthetic motor
oil that exceeds the requirements of modern, high-performance engines and
older engines. It replaces other 0W-30, 5W-30 and 10W-30 motor oils and
consistently outperforms competitive conventional and synthetic motor oils.
Synthetic Blend 15W-40 Heavy Duty
Motor Oil (PCO) | Cost Effective, High Quality
AMSOIL Synthetic Blend 15W-40 Heavy Duty Motor Oil (PCO) features a dual-base
of premium synthetic and hydro-processed base oils in formulation with proven
high quality anti-wear additives. This multi-use oil is designed for both
heavy-duty diesel engines (including modern EGR units) and gasoline engines,
combining versatility and heavy-duty engine protection into one cost effective
motor oil. It is formulated with high levels of dispersant and detergent
additives that effectively control acids and soot thickening to prevent
corrosion, wear and deposits. AMSOIL Synthetic Blend 15W-40 Heavy Duty Motor
Oil is excellent for all season use in on- or off-road applications.
SAE
20W-50 Synthetic Motorcycle Oil (MCV)
High Performance Lubricant for Engines, Transmissions and Primary Chaincases
AMSOIL Synthetic 20W-50 Motorcycle Oil (MCV) is a premium oil designed for
those who demand the absolute best lubrication for their motorcycles. AMSOIL
MCV is the result of extensive research, and it is specially formulated to
excel in all areas unique to motorcycles, including high temperatures of
air-cooled engines such as Harley Davidson® V-Twin, wet clutch lubrication,
extreme pressure regions of gears and chains and rust common to short trips
and storage.
SAE
10W-40 Synthetic Motorcycle Oil (MCF)
AMSOIL Synthetic Motorcycle Oils have been reformulated with new high
performance additive technology that provides even greater multi-functional
benefits for the special requirements of motorcycle applications. These
independent and exclusive new AMSOIL formulations provide second-to-none
viscosity protection for hot-running American and foreign motorcycle engines,
transmissions and primary chaincases.
Series 3000 Synthetic 5W-30
Heavy-Duty Diesel Oil (HDD)
AMSOIL Series 3000 100% Synthetic 5W-30 Diesel Oil (HDD) delivers
extraordinary lubrication in both diesel and gasoline engines found in
commercial, fleet and personal vehicles. By combining the industry’s premier
synthetic technology with AMSOIL premium additives, AMSOIL HDD exceeds the
higher performance demands of modern engines. It withstands the stress of
higher heat, higher acid levels and excessive soot loading found in EGR
equipped engines. AMSOIL Series 3000 Synthetic 5W-30 Diesel Oil consistently
outperforms conventional and synthetic diesel oils for long-lasting
performance and protection.
AMSOIL
Synthetic 5W-40 Premium Diesel Oil (DEO)
AMSOIL Synthetic 5W-40 (DEO) is the premium choice for API CJ-4 emission
quality diesel oil required by model year 2007 and newer diesel engines. It
delivers extraordinary lubrication in diesel engines found in commercial,
fleet and personal vehicles. Built with the latest additive and synthetic base
oil technology, AMSOIL Synthetic 5W-40 Diesel Oil exceeds the higher
performance demands of modern engines. It withstands the stress of heat, soot
and acids to help prevent deposits, corrosion and wear. AMSOIL Synthetic
5W-40, with its broad viscosity range, is ideal for winter and summer use. It
resists breakdown and can extend drain intervals when monitored by oil
analysis.
100% Synthetic 10W-30 Motor Oil
(ATM)
AMSOIL 100% Synthetic 10W-30 Motor Oil (ATM) delivers extraordinary
lubrication in all types of automotive gasoline engines. By combining the
industry premier synthetic technology with AMSOIL premium additives, AMSOIL
ATM exceeds the higher performance demands of modern engines. It withstands
the stress of higher horsepower, higher heat and complicated emission control
systems. AMSOIL Synthetic 10W-30 Motor Oil consistently outperforms
competitive conventional and synthetic motor oils. It delivers long-lasting
performance and protection.
Formula 4-Stroke® 10W-40 Synthetic
Scooter Oil (ASO)
AMSOIL Formula 4-Stroke® 10W-40 Synthetic Scooter Oil (ASO) is formulated
specifically to meet the special needs of today’s high-tech air- and
water-cooled fourstroke motorized scooters, offering unsurpassed wear
protection and friction reduction for longer equipment life and cooler
operating temperatures. Its exceptional shear stability ensures consistent
viscosity protection and provides additional protection for transmissions and
gear boxes, while its friction modifier-free formulation ensures wet clutch
compatibility and smooth clutch operation. A special anti-corrosion additive
package provides long-term protection during periods of inactivity and
storage.
100% Synthetic 0W-20 Motor Oil (ASM) ENERGY
SAVING | FUEL EFFICIENT
AMSOIL 100% Synthetic 0W-20 Motor Oil (ASM) delivers extraordinary lubrication
for automotive gasoline engines. AMSOIL combined the industry premier
synthetic technology and additives into a light viscosity formulation that
withstands high temperatures and delivers outstanding fuel economy and cold
temperature performance. AMSOIL ASM replaces SAE 5W-20 and is recommended for
extended drain intervals according to AMSOIL service interval guidelines. It
delivers long-lasting performance and protection.
100% Synthetic 5W-30 Motor Oil (ASL)
Engineered to outperform all conventional gasoline engine motor oils. Reduce
heat, friction and wear for maximum power, performance and fuel efficiency.
Clean engine formula. Resists high temperature break down that forms sludge
and varnish. Lasts longer and offers better protection. Ideal for hot and cold
climates. Recommended for all gasoline engines.
Formula 4-Stroke® 10W-30/SAE 30
Synthetic Small Engine Oil (ASE)
A commercial grade formulation designed for hot temperature, severe service
operation of small engines where routine maintenance is often difficult or
infrequent. Recommended for use wherever SAE 10W-30 or SAE 30 oil is specified
in gasoline or diesel engines, transmissions, hydraulics, and chain cases
requiring the listed specifications. Applications include maintenance
equipment, tractors, lawn and garden equipment, generators, compactors, pumps,
light towers, welders, log splitters, power washers, cement mixers and
trowels, skid-steers, excavators and compressors.
SAE
20W-50 Synthetic Premium Protection Motor Oil (ARO)
Formulated for use in both gasoline and diesel engines. Offers
multi-functionality and excellent wear protection. Ideal for applications
where the extra protection of a higher viscosity oil is desired. Excellent for
motor homes and older vehicles, as well as most types of modern equipment.
Also compatible for use in motorcycles.
SAE 10W-40 Synthetic Premium
Protection Motor Oil (AMO)
Formulated for use in both gasoline and diesel engines. Offers
multi-functionality and excellent wear protection. Ideal for applications
where the extra protection of a higher viscosity oil is desired. Excellent for
motor homes and older vehicles, as well as most types of modern equipment.
Also compatible for use in motorcycles.
Synthetic Heavy-Duty Diesel &
Marine Motor Oil SAE 15W-40 (AME)
Engineered for all types of diesel engines with an emphasis on modern, low
emission heavy duty diesel engines. High 12 TBN controls acids from combustion
blow-by and EGR. High levels of detergency and dispersancy additives control
soot thickening, oxidation and wear. Resists bore polishing, deposit formation
and ring sticking. Provides clean engine performance. Extended drain
capabilities reduce downtime and motor oil expenses.
SAE 60
Synthetic Racing Oil (AHR)
AMSOIL Synthetic Super Heavy Weight Racing Oil (AHR) is a high-viscosity oil
designed for high-horsepower racing engines, typically supercharged and
alcohol-burning or nitro-fueled, requiring a high-viscosity oil to resist the
thinning effects of fuel dilution.
AMSOIL Synthetic Super Heavy Weight Racing Oil is formulated specifically for
wear protection and friction reduction in the extreme conditions of racing. It
is race proven and reduces friction, promotes power and inhibits wear.
European Car Formula Synthetic
5W-40 Motor Oil (AFL)
AMSOIL European Car Formula Synthetic 5W-40 Motor Oil (AFL) is specially
formulated for the lubrication needs of modern European gasoline and diesel
cars and light trucks. Formulated with advanced AMSOIL synthetic base stocks,
premium additives and a 5W-40 viscosity rating, AMSOIL AFL is the preferred
oil for virtually all European automobiles, especially turbo charged models.
It is one of the only oils in North America to be recommended for the latest
specifications of all three major European automakers - Volkswagen (Audi), BMW
and Mercedes-Benz and the latest North American API specification. AMSOIL AFL
is highly versatile for multiple applications.
Formula 4-Stroke® PowerSports 0W-40
Synthetic Motor Oil (AFF)
AMSOIL Formula 4-Stroke® PowerSports Synthetic Motor Oil (AFF) is specially
formulated for ATVs, UTVs, snowmobiles and other power sports applications.
Its broad viscosity range and wax-free formulation make it excellent for use
in both hot and cold temperature extremes. As an SAE 40 weight motor oil,
AMSOIL AFF provides outstanding protection for hot operating engines, while
its 0W rating and -60°F pour point ensure easy cranking, excellent cold
weather starting and quick post-startup protection. Formula 4-Stroke® Power
Sports is an extreme temperature lubricant that provides outstanding
performance in high performance, recreational or work/utility engines.
Synthetic 10W-30/SAE 30 Heavy Duty
Diesel Oil (ACD)
AMSOIL Synthetic 10W-30/SAE 30 Diesel Oil (ACD) is formulated with premium
synthetic base oils that exceed both 10W-30 multi-grade and SAE 30
straight-grade viscosity requirements for outstanding performance in modern
and older diesel engines. Unlike conventional SAE 30 motor oils, AMSOIL ACD
has a naturally high viscosity index and does not contain paraffin (wax). It
has a -36°F pour point and qualifies for SAE 10W, making it an “all season”
multi-grade lubricant with a wide operating temperature range. AMSOIL ACD is
formulated without viscosity index improvers (VI). This shear stable
formulation stops viscosity loss and associated bearing and cylinder bore
wear. AMSOIL ACD contains premium additives with a high 12 TBN to neutralize
acids from blow-by, exhaust gas recirculation (EGR) and high sulfur diesel
fuels. It protects against damaging piston deposits, ring sticking and sludge.
SAE (20W)-40 Synthetic Natural Gas Engine Oil (ANG)
AMSOIL Synthetic Natural Gas Engine Oil (ANG) was developed to deliver
unsurpassed performance in natural gas engines calling for an SAE 40, low-ash
(<.50%) lubricant. AMSOIL Synthetic Natural Gas Engine Oil’s low-ash
formulation minimizes combustion chamber deposit formation, critical in
continuous operation applications. AMSOIL ANG also significantly reduces valve
recession, a common problem with other low-ash oils. AMSOIL Synthetic Natural
Gas Engine Oil is thermally stable, allowing it to combat oxidation, oil
degradation and internal deposit formation.
Extends
Oil Life 
